How to use the sauna belt?

• The sauna belt is essentially similar to a heating pad. However, the temperature is controlled up to 122 F. We recommend you to set the maximum temperature for the first five minutes, then set it to your desired temperature

• Strap the sauna belt around the chosen body part using velcro sections. The sauna belt should completely surround your body without getting creased, doubles over or folded. Do not stop the sauna belt on too tightly to achieve the sauna effect

• Check to see if your supplied mains voltage is the same as that printed on the plug before plugging the device in

• Make sure the temperature regular is switched OFF

• Plug the sauna belt into the mains.
Turn the dial on the temperature regular to the maximum position so the device heats up quickly. After five minutes, lower temperature to desire

• At the end of the session, towel off the sweat and wait 15 to 20 minutes before showing or having a bath, eating or drinking cold drinks, Do not worry if your skin is reddish. This reaction is due to the constant temperature it has been exposed to and will disappear after a couple of hours

Maintenance and clearing

Once you have finished your session, take off the sauna belt and spread it out on a flat surface until it cools down. Clean the sauna belt with alcohol or a wet cloth to keep it hygienic and durable. Store in a dry place.